Xerox Versant 80 Press - Changing Scan Settings;Options; Canceling a Scan Job; Stopping a Scan Job

Changing Scan Settings/Options
While your job is scanning, you can change settings to that job by performing the
following steps.
1. Select Next Original.
2. Select Change Settings.
3. Select the appropriate section and make select features. The following features can
be adjusted:
• Color Scanning
• 2 Sided Scanning
• Original Type
• Image Options (Lighten/Darken)
• Image Enhancement
• Resolution
• Quality/File Size
• Shadow Suppression
• Original Orientation
• Original Size
• Edge Erase
• Book Scanning
• Reduce/Enlarge
4. After your changes are complete, select Start.
Canceling a Scan Job
1. Either select Stop on the UI touch screen or press the Stop button on the UI control
panel.
2. On the UI control panel, press Cancel to end scanning or Start to restart the scan.
3. Press the Job Status button on the UI.
4. Select the job to cancel, and then press Stop.
Note
When a scan is canceled, scan data already stored to the mailbox is deleted.
Stopping a Scan Job
1. While a scan job is in process, Press either the Stop button on the UI control panel
or select Delete on the UI touch screen.
2. Select Delete.
3. If Delete does not appear on the screen, press the Job Status button on the UI control
panel.
4. Select the job to cancel and select Delete.
5-3Xerox
®
Versant
®
80 Press
User Guide
Scan