Xerox Versant 80 Press - Specifications for the Standard Finisher; Booklet Maker Finisher; Standard; Booklet Maker Finisher Specifications

9. Reinstall the cartridge unit to its original position in the finisher.
10. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Specifications for the Standard Finisher /
Booklet Maker Finisher
Standard / Booklet Maker Finisher Specifications
SpecificationItem
• Top Tray: Collated / Uncollated
Note
Transparencies can be sent to the TOP tray of the finisher ONLY.
Transparencies cannot be sent to the stacker (middle) tray.
• Stacker (middle) Tray: Collated / Uncollated (Offset available)
Tray Type
Top Tray:
• Maximum: SRA3, 13 x19 in., 12.6 x19.2 in., 330 x 488 mm (custom
size)
• Minimum: 100 x 148 mm (SEF), 4 x 6 in. (SEF), A6 (SEF) postcards
Stacker (middle) Tray:
• Maximum: 13 x 19 in. (330 x 488 mm), SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Optional C / Z Folder tray: Supports A4 (SEF) and 8.5 x 11 in. (SEF)
Delivery to a supported third-party, DFA device:
• Maximum: 13 x 19 in., SRA3
• Minimum: B5, Executive (7.25 x 10.5 in.)
Supported Paper Size
Xerox
®
Versant
®
80 Press24-30
User Guide
Standard Finisher / Booklet Maker Finisher