Xerox Versant 80 Press - HCS Exit Jam (E8); Information about Paper Curl and the HCS

3. Lift the green handle(s) and/or rotate the green knob and remove all paper in the
entrance area.
4. Close the green handle(s).
5. Close the HCS Front Cover.
6. If the press UI indicates there is a jam in the print engine, follow the instructions on
the screen to remove any paper in the area indicated.
7. Follow the instructions displayed on the UI to resume printing.
HCS Exit Jam (E8)
Perform the following steps to clear the jam and resume printing:
1. Open the HCS Front Cover.
2. Lift the green handle and/or rotate the green knob and remove all paper in the
entrance area.
3. Close the green handle(s).
4. Close the HCS Front Cover.
5. If the press UI indicates there is a jam in the print engine, follow the instructions on
the screen to remove any paper in the area indicated.
6. Follow the instructions displayed on the UI to resume printing.
Information about Paper Curl and the HCS
Check the output in the Stacker Tray / Cart for paper curl and choose one of the following
• There is no curl present and the output is acceptable (meets customer satisfaction);
you are finished.
• There is no curl present; however, the output is not acceptable: Call for service.
Xerox
®
Versant
®
80 Press23-8
User Guide
High Capacity Stacker (HCS)