Xerox Versant 80 Press - Problem Solving for the BR Finisher; Fault Codes - Business Ready (BR) Finisher and Optional Booklet Maker

• Wait 10 seconds before reinserting the container into the printer. The hole punch
counter resets after 10 seconds.
• If you remove the hole punch waste container before the device instructs you
to, empty the container before you reinsert it into the finisher.
3. Empty the container.
4. Insert the container all the way into the finisher.
5. Close the front door of the Business Ready Finisher.
Problem Solving for the BR Finisher
Fault Codes - Business Ready (BR) Finisher and Optional Booklet
Maker
Recommended SolutionPossible CauseFault Code
Follow the instructions shown on
the press User Interface (UI).
1. Remove all sheets or
pieces from the jam clear-
ance areas.
2. Close the front door.
3. If necessary, Power Off /
On the press.
4. If error persists, contact
the Customer Support
Center.
Misfeed in the finisher paper path012-108, 012-110, 012-
113, -12-114, 012-115,
012-117 - 012-120,
012-122, 012-128, 012-
130, 012-131, 012-132,
012-135, 012-136, 012-
152, 012-171, 012-172,
012-180
19-5Xerox
®
Versant
®
80 Press
User Guide
Business Ready (BR) Finisher and Optional Booklet Maker