Xerox Versant 80 Press - Paper Jams Inside the OHCF Trays (6 and 7)

2. Lift and open the Top Cover of the Bypass (Tray 5).
3. Remove any jammed paper.
Note
If paper is torn, check inside the press and remove it.
4. Close the Top Cover of the Bypass (Tray 5).
5. Reload paper into the tray and resume printing.
Paper Jams Inside the OHCF Trays (6 and 7)
1. Pull out the tray where the paper jam occurred.
17-9Xerox
®
Versant
®
80 Press
User Guide
1- or 2-Tray Oversized High Capacity Feeder (OHCF / Trays 6 and 7)