Xerox Versant 80 Press - GBC Advancedpunch Procedures; Changing the Punch die

Letter (8.5 x 11 in.) Punch Dies
A4 Punch Dies
GBC AdvancedPunch Procedures
Changing the Punch Die
Note
The interchangeable punch die is located on the left, front side of the unit.
1. Ensure that the press is in standby mode and is not in the process of running any
copy, scan, or print jobs.
2. Open the AdvancedPunch access door panel.
3. Securely grasp the handle and pull firmly.
This disengages the Automatic Latching Mechanism and allows the punch die to
slide out of the unit.
4. Continue to pull the handle until the Punch Die Set is fully removed, supporting it
with both hands.
Xerox
®
Versant
®
80 Press21-4
User Guide
GBC AdvancedPunch