The press prints the complete set of tabs with the body pages defined. Any extra
tabs not used in the job are sent to the output tray.
Tips for Printing on Tabs from the EX Print Server
Use the following tips for printing on tabs from the EX Print Server:
• The EX Print Server allows for setting up your job to print on tabs. Otherwise, you can
set up your job to insert preprinted tabs into your document. Use one tray for the
body pages, another tray for the preprinted tab stock, and another tray for cover or
back pages.
• While you can print tab stock from any of the paper trays on the system (Trays 1, 2,
3, 5, 6 or 7), Trays 6 and 7 should be used for best results. If you plan to apply staple
or punch finishing, use Trays 5, 6 or 7 only.
• Loading orientation depends on what tray you are using.
Xerox
®
Versant
®
80 Press12-4
User Guide
How to Submit a Print Job
To Next Page
Loading...
