Xerox Versant 80 Press - Fault Codes - Oversized High Capacity Feeder (Trays 6 and; or 7)

RemedyCauseFault Code
1. Check the paper loaded in Tray 6.
2. Power off and then power on the
machine.
3. If the tray errors are not fixed by
performing the relevant remedy,
contact the Customer Support
Center.
(Optional) Paper Tray 6 malfunc-
tioned.
078-260, 078-
261, 078-262,
078-263, 078-
264, 078-265,
078-266, 078-
267, 078-268,
078-269, 078-
270, 078-271,
078-272, 078-
273, 078-274,
078-275, 078-
276, 078-277,
078-278, 078-
279, 078-280,
078-300, 078-
301, 078-500,
078-901, 078-
941, 078-942,
078-943
Fault Codes - Oversized High Capacity Feeder (Trays 6 and / or 7)
The OHCF fault codes below may pertain to a specific tray of the feeder. If you experience
these fault codes frequently, you should follow the procedure on how to replace the
feed rolls (Replacing the OHCF Bypass Tray Feed Rolls (Trays 6 and 7) and Replacing
the OHCF Feed Rolls (Trays 6 and 7)).
Recommended SolutionPossible CauseFault CodeFault Area
1. Fan the paper to eliminate
paper adhesion (especially
in high humidity or high
temperature environments).
2. Clean the Bypass Tray feed,
retard, and nudger rolls with
a damp cloth.
3. Replace feed rolls (feed, re-
tard, nudger); refer to Repla-
cing the OHCF Bypass Tray
Feed Rolls (Trays 6 and 7).
4. If problem persists, Call for
service.
Repetitive misfeeds or
multifeeds
078-105,
078-120,
078-125,
078-126,
078-127
Bypass (Tray 5)
Xerox
®
Versant
®
80 Press14-20
User Guide
Press Problem Solving