Xerox Versant 80 Press - Procedures for Replacing Consumables; Replacing Consumable Supplies; Ordering Supplies

Procedures for Replacing Consumables
Replacing Consumable Supplies
The following items are the Customer Replaceable Units (CRU) for the press. It is
recommended that you have a supply of these items available to eliminate down time
when they need to be replaced.
• Dry Ink/Toner cartridges (C, M, Y, K)
• Drum cartridges (C, M, Y, K)
• An empty Waste Dry Ink/Toner bottle
• Suction Filter
Refer to www.xerox.com for the latest consumable part numbers.
Note
The Fuser Module may be replaced by the customer only if directed to do so by Service.
Note
Store supply items and Xerox parts in their original packages in a convenient location.
Always recycle/dispose the used CRU according to the disposal instructions supplied
with the new CRU.
Ordering Supplies
Xerox supplies, paper, and throughput material can be ordered from the web site
www.xerox.com and clicking on the Supplies link. For any item that is not orderable from
the web site, contact your Xerox Service Representative.
Note
The cleaning pads used with the ROS Window cleaning wand are not orderable. Contact
your Xerox representative for any additional cleaning pads.
Approximate Print Yield (Full
Color 8.5x11/A4 Prints)
Reorder QuantityCRUs (Supply Item)
50,0002 per boxBlack Dry Ink/Toner Cartridge
55,0001 per boxCyan Dry Ink/Toner Cartridge
51,0001 per boxMagenta Dry Ink/Toner Cartridge
51,0001 per boxYellow Dry Ink/Toner Cartridge
45,0001Waste Dry Ink/Toner Bottle
Xerox
®
Versant
®
80 Press13-6
User Guide
Press Maintenance