Xerox Versant 80 Press - Stored Programming Procedures; Creating and Saving a Job as a Stored Program

The following features and operations cannot be saved in Stored Programming:
• The selection of the Store (save) option from Stored Programming
• Selecting the steps to recall and run a stored program
• Any System Settings features or options.
• The Store to USB button on the Home window
• The Network Scanning, Job Flow Sheets, and Web Applications buttons on the
Home window
• The Custom button that is assigned to the Network Scanning or Job Flow Sheets
service
• Buttons than cannot be selected include the following:
- The Language button on the Home window
- The Screen Brightness button on the Home window
- Selecting items using the scroll bar
- Scrolling operation while previewing
- The Browse button for the Scan to PC service
- Operations to edit e-mail addresses for the E-mail service (such as the pop-up
menu Keyboard, Remove, and Edit which are displayed by selecting Recipient(s)
or From)
- The Energy Saver button
• An unsaved job (program) will be canceled during the following activities:
- When the Interrupt button is pressed
- If the Auto Clear feature causes a time-out
- If a pop-up window occurs (such as a paper jam)
Stored Programming Procedures
Creating and Saving a Job as a Stored Program
Note
For the purpose of this procedure, an example Copy job will be created and stored.
1. Press the Machine Status button on the press UI.
2. Select the Tools tab.
3. Select Setup & Calibration > Setup > Stored Programming.
4. Select Store.
5. Select a Stored Programming item from the numbered list.
If required, select the up and down arrows to display the previous or next screen.
Note
Once a job is stored to a button (item), it cannot be overwritten.
8-3Xerox
®
Versant
®
80 Press
User Guide
Stored Programming