Xerox Versant 80 Press - Squarefold Trimmer Module Specifications; Identifying the Module Components; Main Components

SquareFold Trimmer Module Specifications
SpecificationsItem
• Maximum: 13 x 18 in. (330 x 457 mm)
• Minimum: 8.5 x 11 in. / A4 SEF (216 x 270 mm)
Note
The SquareFold Trimmer Module requires both Interface Module and the
Booklet Maker Finisher.
Paper size
• 5-20 sheet booklet (up to 80 imaged sides) at 24 lb. / 90 gsm
• 5-25 sheet booklet (up to 100 imaged sides) at 200 lb. / 80 gsm
Cut amount: 2-20 mm, adjustable in 0.1 mm increments
Trim capacity
16 lb. bond-90 lb. coverPaper weights
64 to 300 gsm uncoated; 106 to 300 gsm coated
Note
Refer to the Booklet Maker Finisher specifications in this guide.
Identifying the Module Components
Main Components
The main components consist of:
1. Top Left Cover: Open this cover to remove paper jams. The square fold mechanism
is found in this area.
2. Top Right Cover: Open this cover to remove paper jams. The trimming mechanism
is found in this area.
Xerox
®
Versant
®
80 Press25-2
User Guide
SquareFold Trimmer Module