Xerox Versant 80 Press - Clearing Jams in the BR Finisher at Position 3 A

Recommended SolutionPossible CauseFault Code
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
General finisher malfunction012-161, 012-211, 212,
012-213, 012-221 -
012-224, 012-227, 012-
228, 012-254, 012-260,
012-263, 012-274, 012-
279, 012-282, 012-283,
012-284, 012-288, 012-
289, 012-290, 012-298,
012-299, 012-302, 012-
303, 012-308, 012-326,
012-334, 012-601, 012-
602, 012-912
013-300, 024-916, 024-
917, 024-980, 024-981,
024-982, 028-915
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
Problems in the finisher punch012-231 - 012-234,
012-247, 024-926, 024-
963, 112-700
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
Problems in the optional booklet
maker
012-243, 012-246, 012-
265, 012-266, 012-269,
012-292, 012-297, 012-
307, 012-319, 012-983,
012-984, 012-989
1. Power Off / On the press.
2. If error persists, contact
the Customer Support
Center.
Problems with the finisher stapler
or booklet stapler
012-291, 012-295, 012-
296 - 024-979, 024-
987, 024-988, 124-711,
124-712, 124-713
Clearing Jams in the BR Finisher at Position 3a
1. If the paper is visible at the output tray exit, remove the paper by pulling it gently in
the direction shown.
2. Open the front door of the Business Ready Finisher.
Xerox
®
Versant
®
80 Press19-6
User Guide
Business Ready (BR) Finisher and Optional Booklet Maker