Xerox Versant 80 Press - Standard Finisher Plus; Standard Finisher Plus Introduction; Standard Finisher Plus Components; Standard Finisher Plus Main Components

26
Standard Finisher Plus
Standard Finisher Plus Introduction
The Standard Finisher Plus acts as a communication device and provides a paper path
between the press and any third-party, Document Finishing Architecture (DFA) device
that is attached to the press.
Note
The Standard Finisher Plus requires either Interface Module or the Interface Cooling
Module.
The Standard Finisher Plus provides the same features as the Standard Finisher with up
to 2,000 sheet stacking capacity and includes a Finishing Transport Module. The Transport
Module enables connectivity to third-party, Document Finishing Architecture (DFA)
in-line finishing options.
Standard Finisher Plus Components
Standard Finisher Plus Main Components
Note
The Standard Finisher Plus requires either the Interface Module or the Interface Cooling
Module.
The Standard Finisher Plus consists of these two modules:
1 Finisher Module
Output prints are fed from the press through the output path to the Finisher Module.
26-1Xerox
®
Versant
®
80 Press
User Guide