Xerox Versant 80 Press - Pin Removal Table for ISO Paper Sizes

Pin Removal Table for ISO Paper Sizes
Wire 3:1
Square
Wire 2:1
Square
Comb-
Bind
2 or 4
Hole (6.5
mm)
2 or 4
Hole (8
mm)
Wire 3:1
Round
Wire 2:1
Round
Coil
Round
ISO Pa-
per Sizes
Pin Numbers to Remove Based On Paper Size or Orientation
NoneNoneNone*2H, 4H2H, 4HNoneNoneNoneA4 LEF
7, 414, 214, 191,41, 45, 304, 217, 41A4 SEF
7, 414, 214, 191, 41, 45, 304, 217, 41A5 LEF
NoneNoneNone*2H, 4H2H, 4HNoneNoneNoneA3 SEF
NoneNoneNone*2H, 4H2H, 4HNoneNoneNoneSRA4 LEF
4, 5, 30,
31
4, 214, 191,41, 44, 5, 30,
31
4, 216, 7, 42,
41
SRA4
SEF
NoneNoneNone*2H, 4H2H, 4HNoneNoneNoneSRA3
SEF
Table Legend:
• * For CombBind 20H Configuration Pull Pin Number 1
• N/A:
Not Applicable
• Long Edge Feed (LEF):
Indicates that the paper is being fed through the system so that the longer side of the sheet
will be punched.
• Short Edge Feed (SEF):
Indicates that the paper is being fed through the system so that the shorter side of the
sheet will be punched.
• Letter (LTR):
Size is 8.5 inch x 11 inch
• Statement Paper:
Size is 8. 5 inch x 5.5 inch
• Legal Paper:
Size is 8.5 inch x 14 inch
• Ledger Paper:
Size is 11 inch x 17 inch
22-9Xerox
®
Versant
®
80 Press
User Guide
GBC AdvancedPunch Pro