Xerox Versant 80 Press - Page 347

SpecificationItem
Trays:
• Top Tray: 55-350 gsm coated and uncoated
• Stacker (middle) Tray: 55-300 gsm
• Optional C / Z Folder tray: 64-90 gsm
Delivery to a supported third-party, DFA device: 55-350 gsm
Supported Paper Weight
• Top Tray: 500 sheets
• Stacker (middle) Tray: 2,000 sheets, 200 sets*
• Optional C / Z Folder tray: Minimum 30 sheets
*When using A4 LEF, B5 LEF, 8.5 x 11 in. LEF, 8 x 10 in. LEF, 7.5 x 10.5
in. LEF only. When using paper of other sizes, tray capacity is 1,500
sheets and 100 sets.
**Tray may not support some paper types.
Tray Capacity
Maximum staple sheets: 100 sheets
• When using paper of size larger than A4 or 8.5 x 11 in., the max-
imum number of sheets that can be stapled is 65.
• Staple nails may bend when using certain paper types.
Paper size:
• Maximum: A3 / 11 x 17 in.
• Minimum: B5, Executive (7.25 x 10.5 in.)
Staple position:
• 1 location: (front: angled stapling, center: parallel stapling, back:
parallel stapling*)
• 2 locations: (parallel stapling)
• 4 locations: A4 (LEF) and 8.5 x 11 in. (LEF) parallel stapling
*: Angled stapling for A3 and A4
Stapling (variable length)
Supported paper size:
• Maximum: A3 / 11 x 17 in.
• Minimum: B5 LEF (2 holes), A4 LEF (4 holes)
Number of holes: 2 and 3 (NA), 2 and 4 (Europe)
Paper type: 55-220 gsm
Hole Punching
24-31Xerox
®
Versant
®
80 Press
User Guide
Standard Finisher / Booklet Maker Finisher