Xerox Versant 80 Press - Page 348

SpecificationItem
Maximum number of sheets:
• Fold and Staple: 25 sheets
• Fold only: 5 sheets
When using Xerox 20 lb. / 75 gsm paper, only 14 sheets can be
stapled if adding a cover.
Paper size:
• Maximum: A3, 13 x 18 in.
• Minimum: A4 SEF, 8.5 x 11 in. SEF
Note
When using light-weight stocks, media jams may occur with Booklet
Creation, Single Fold, and stapling for output that is 25 sheets or
more. If media jams do occur, it is recommended that a different
media type is selected for the job.
Paper type: Fold only or Fold and Staple: 55-350gsm uncoated, 106-
300gsm coated
Paper Weights / Booklet Capacity:
• 64-80 gsm, Uncoated: 25 sheets
• 81-90 gsm, Uncoated: 20 sheets
• 91-105 gsm, Uncoated: 10 sheets
• 106-128 gsm, Uncoated: 10 sheets, Coated: 10 sheets
• 129-150 gsm, Uncoated: 10 sheets, Coated: 10 sheets
• 151-176 gsm, Uncoated: 10 sheets, Coated: 10 sheets
• 177-220 gsm, Uncoated: 5 sheets, Coated: 5 sheets
• 221-256 gsm, 4 sheets max. coated or uncoated
• 257-350 gsm, 3 sheets max, coated or uncoated
Booklet Creation / Single
Fold
Note
Non-stapled fold sets are limited to 5 sheets of paper.
Folding
Paper size:
• Maximum: A3 / 11 x 17 in.
• Minimum: B5, Executive (7.25 x 10.5 in.)
The press does not print on paper loaded in Tray T1.
Capacity: 200 sheets when using Xerox 20 lb. / 75 gsm paper.
Paper type: 64-220 gsm
Tray T1 (Post-Process In-
serter; also called Inter-
poser)
Xerox
®
Versant
®
80 Press24-32
User Guide
Standard Finisher / Booklet Maker Finisher