Recommended solutionPossible causeFault codeFault Area
Either remove unnecessary
data from the hard disk to in-
crease free disk space, or ini-
tialize the hard disk.
When using the scan fea-
ture, hard disk capacity is
insufficient for writing to a
file.
016-786
Check whether you can access
the specified forwarding des-
tination.
In Scan to FTP / SMB, or
Job Template, the forward-
ing destination or job tem-
plate save location could
not be accessed.
016-791
Specified job history does not
exist.
Specified job history could
not be acquired, when
printing Job Counter Re-
port.
016-792
Either remove unnecessary
data from the hard disk to in-
crease free disk space, or ini-
tialize the hard disk.
The hard disk has run out
free space.
016-793
Check the data stored in the
media with a computer.
An error occurred when
reading data stored in a
media (such as a card read-
er for a digital camera).
016-794, 016-
795
Remove all paper from the
tray. Set the output tray for
three fold.
The envelope folder tray is
full.
024-987, 024-
988
General
Power Off/On the press.
If error persists, contact the
Customer Support Center.
Developer Housing fault024-923, 024-
924, 024-925
Developer
Create an Auto Alignment
Profile at the Stock Library
Manager. If error persists,
contact the Customer Support
Center.
Registration error; press de-
tected less than optimal re-
gistration thresholds
26-401
Change the IP address.IP address already exists027-452General
Change the IP address
manually.
Failed to obtain IP address
from DHCP server.
027-453
Check the medium with a
computer, or insert the medi-
um correctly..
The medium (media reader
/ USB drive) is damaged or
inserted incorrectly.
027-700, 027-
701
14-15Xerox
®
Versant
®
80 Press
User Guide
Press Problem Solving