Note
If an error code appears that is not listed in the table below, or if an error persists after
following the listed solution, then contact the Xerox Customer Support Center.
RemedyCauseFault Code
Add paper to Tray 6.Tray 6 is empty/out of paper.024-955
Reset the paper or cancel the job.The designated paper size and
size of paper in the tray differ
when feeding paper from the
inserter.
024-974
1. Check the paper loaded in Tray 6.
2. Power off and then power on the
machine.
3. If the tray errors are not fixed by
performing the relevant remedy,
contact the Customer Support
Center.
(Optional) Paper Tray 6 malfunc-
tioned.
078-100, 078-
101, 078-102,
078-151
Power-cycle the machine. If the machine is
not improved by performing the relevant
remedy, contact your Xerox Customer Sup-
port Center.
The high capacity tray (the Tray
6) malfunctioned.
078-250
1. Check the paper loaded in Tray 6.
2. Power off and then power on the
machine.
3. If the tray errors are not fixed by
performing the relevant remedy,
contact the Customer Support
Center.
(Optional) Paper Tray 6 malfunc-
tioned.
078-260, 078-
261, 078-262,
078-263, 078-
264, 078-265,
078-266, 078-
267, 078-268,
078-269, 078-
270, 078-271,
078-272, 078-
273, 078-274,
078-275, 078-
276, 078-277,
078-278, 078-
279, 078-280,
078-300, 078-
301, 078-500,
078-901, 078-
941, 078-942,
078-943
16-3Xerox
®
Versant
®
80 Press
User Guide
1-Tray High Capacity Feeder (HCF / Tray 6), Letter-Size / A4 Only
To Next Page
Loading...
