GBC
®
AdvancedPunch
™
Pro
The GBC AdvancedPunch Pro may be attached to a variety of optional finishing
accessories and provides all the same capabilities as the GBC AdvancedPunch.
The AdvancedPunch Pro also provides additional capabilities such as the following:
• A bigger range of media sizes and types
• LEF and SEF punching
• 2-up punching (double punch) on large sheets
• Quick-change die sets that can be interchanged without any tools
• All die sets include an Identification Label providing the user with the hole pattern
and name
Information on this device can be found later in this guide. Information can also be
found on the customer documentation CD that came with the accessory, or it can be
downloaded from www.xerox.com.
High Capacity Stacker (HCS)
The High Capacity Stacker (HCS) is an optional finishing device that provides production
stacking and offsetting capabilities of up to 5,000 sheets to a cart in the Stacker
Tray/Cart. Shorter runs of up to 500 sheets can be sent to the stacker Top Tray.
Standard Finisher (with or without optional C/Z Folder)
This finisher provides a wide range of finishing / folding options. It includes a basic
inline punch, stapler, built-in decurler, and a post-process inserter/interposer (Tray T1).
An optional C/Z Folder also is available.
1-13Xerox
®
Versant
®
80 Press
User Guide
Product Overview
To Next Page
Loading...
