3. Pull out the folder output tray (2d), swing lever the 2g, and remove the jammed
paper.
Note
If paper is torn, check inside the machine and remove it.
4. Return the opened lever (2g) to its original position, and close the output tray (2d).
5. Close the right cover on the finisher.
Note
A message will display and the machine will not operate if the right cover is open
even slightly.
Paper Jams at Unit 4 and Knob 4a
1. Make sure that the machine has stopped printing.
2. Open the right cover on the finisher.
3. Pull out unit 4.
4. Turn the knob 4a to remove the jammed paper from the left side of unit 4.
Xerox
®
Versant
®
80 Press24-24
User Guide
Standard Finisher / Booklet Maker Finisher
To Next Page
Loading...
