Fax Setup
Xerox WorkCentre 3550
User Guide
143
Setting up DRPD Mode
To set up the DRPD mode:
1. Press Machine Status on the control panel.
2. Press the up/down arrows to highlight Fax Setup and press OK.
3. Enter the Administrator’s Password using the keypad. Refer to Accessing the Setup Options on
page 128 for instructions.
4. Press the up/down arrows to highlight Receiving and press OK.
5. Press the up/down arrows to highlight Receive Mode and press OK.
6. Press the up/down arrows to highlight DRPD and press OK.
Waiting Ring appears on the display.
7. Call your fax number from another telephone. It is not necessary to place the call from a fax
machine. When your machine begins to ring, do not answer the call. The machine requires several
rings to learn the pattern.
When the machine completes learning, the display shows Completed DRPD Setup. If the DRPD
setup fails, Error DRPD Ring appears.
8. Press OK when DRPD appears.
Notes:
• DRPD must be set up again if you re-assign your fax number, or connect the machine to
another telephone line.
• After DRPD has been set up, call your fax number again to verify that the machine
answers with a fax tone. Then have a call placed to a different number assigned to that
Junk Fax Setup
Note: This setting may not be
available depending on your
country.
Using this feature, the system
will not accept faxes received
from numbers stored in the
memory as junk fax numbers.
This feature is useful for blocking
any unwanted faxes.
•On
• Add: Allows you to add
up to 10 junk fax
numbers.
• Delete: Allows you to
delete one fax number, or
all the fax numbers from
the list.
•Off *
DRPD Mode This mode enables a single
telephone line to answer several
different telephone numbers. In
this menu, you can set the
machine to recognize which ring
patterns to answer.
For instructions on setting up
DRPD Mode, refer to Setting up
DRPD Mode on page 143.
Duplex Print Set this duplex feature to save
paper. When the machine prints
the received fax data, it prints
them on both sides of the paper.
•Off *
• Long Edge
• Short Edge
Option Description Settings
To Next Page
Loading...
Need help?
General
Weight and Dimensions
