Copy Procedure
Xerox WorkCentre 3550
User Guide
27
Document Glass
The following steps explain how to load documents using the document glass:
1. Raise the document feeder.
2. Place the document face down on the document glass,
aligned with the tip of the registration arrow near the top left
of the document glass.
The default document size is 8.5 x 11” or A4. For other sized
documents change the Original Size option. Refer to Copy
Options on page 29 for further information.
3. Lower the document feeder.
Select the Features
Various features can be selected for your copy job. The most common features are selected from the
control panel. Once you have made a selection, press Back to return to the Ready screen.
1. Press the Copy button on the control panel.
2. Press the Paper Supply button on the control panel:
• Auto Select: With this option selected, the machine
chooses the correct paper for the copy job based on the
size of the originals being scanned.
• Tray 1: Use this option to select the paper loaded in Tray
1.
• Tray 2 (Optional): Use this option to select the paper
loaded in Tray 2.
Note: Trays 1 & 2 can each hold 500 sheets of 20lb paper. Weight ranges from 60-105 g/sm. Sizes
range from A4 (SEF) to Legal.
• Bypass Tray: Use this option when feeding individual types of stock, for example letterhead
or labels for one-off jobs. The Bypass Tray holds up to 50 sheets of 20lb paper or up to 5
transparency sheets or up to 5 envelopes.
Select the Paper Supply option required using the up/down arrows and press OK.
For more information, refer to Paper and Media on page 117.
3. Press the 2 Sided button on the control panel. Two-sided copies can be made automatically from
one or two-sided originals:
• 1 1 Sided: Use this option for 1 sided originals when 1 sided copies are required.
• 1 2 Sided: Use this option for 1 sided originals when 2 sided copies are required.
• 1 2 Sided, Rotate Side 2: This option produces 2 sided copies from 1 sided originals and
rotates 180 degrees every second side image. Use this option to create documents which can
be read in a “head to toe” manner, for example a calendar.
• 2 2 Sided: Use this option for 2 sided originals when 2 sided copies are required.
• 2 1 Sided: Use this option for 2 sided originals when 1 sided copies are required.
• 2 1 Sided, Rotate Side 2: This option produces 1 sided copies from 2 sided originals and
rotates 180 degrees every second side image. The “read” orientation for this option varies
depending on the input originals. For example, if “head to head” orientation originals are
To Next Page
Loading...
Need help?
General
Weight and Dimensions
