Xerox WorkCentre 3550 - Information Pages

Information Pages
Xerox WorkCentre 3550
User Guide
134
Information Pages
1. Press Machine Status on the control panel.
2. Press the up/down arrows to highlight Information Pages and press OK.
The following Information Pages options and settings are available:
Option Description Settings
All Pages This option enables you to print all the
Information Pages.
•Printing? Yes | No
Configuration Report This list shows the status of the user-
selectable options.
•Printing? Yes | No
Address Book This list shows all of the Fax and E-mail
addresses currently stored in the
machine’s memory.
•Fax
•E-mail
•Printing?
Yes | No
Send Report This report shows the fax number, the
number of pages, the elapsed time of
the job, the communication mode, and
the communication results for a
particular Fax job.
Note: You can set up your machine to
automatically print a transmission
confirmation report after each Fax job.
•Printing? Yes | No
Sent Report This report shows information on the
faxes and e-mails you have recently
sent.
Note: You can set the machine to
automatically print this report every 50
communications.
•Fax
•E-mail
• Speed E-
mail
•Group E-
mail
•All
•Printing?
Yes | No
Fax Recv Report This report shows information on the
faxes you have recently received.
•Printing? Yes | No
Schedule Job This list shows the documents currently
stored for delayed faxes along with the
starting time and type of each
operation.
•Printing? Yes | No
Junk Fax Report This list shows the fax numbers
specified as junk fax numbers. To add
or delete numbers to or from this list,
access the Junk Fax Setup menu.
•Printing? Yes | No
Network Information This list shows information about your
machine’s network connection and
configuration.
•Printing? Yes | No