Xerox WorkCentre 3550 - Page 153

System Setup
Xerox WorkCentre 3550
User Guide
153
The following Clear Settings options and settings are available:
5. Press the up/down arrows to highlight the option required and press OK.
6. Press the up/down arrows to highlight Yes to clear the settings back to factory defaults, or No to
keep the settings programmed. Press OK.
7. Press Stop to return to ready mode.
Option Description Settings
All settings Clears all of the data stored in
memory and resets all of your
settings to the factory default.
•Clear Settings? Yes | No
Copy Setup Clears all Copy Setup settings and
restores all of the copy options to
the factory default.
•Clear Settings? Yes | No
Fax Setup Clears all Fax Setup settings and
restores all of the fax options to
the factory default.
•Clear Settings? Yes | No
Scan Setup Clears all Scan Setup settings and
restores all of the scan options to
the factory default.
•Clear Settings? Yes | No
System Setup Clears all System Setup settings
and restores all of the system
options to the factory default.
•Clear Settings? Yes | No
Network Settings Clears all Network Settings and
restores all of the network options
to the factory default.
•Clear Settings? Yes | No
Address Book Clears all of the e-mail address
entries stored in memory.
•Fax
•E-mail
•Clear Settings?
Yes | No
Sent Report Clears all records of sent faxes and
e-mails.
•Fax
•E-mail
•Clear Settings?
Yes | No
Fax Rcv Report Clears all records of received faxes. •Clear Settings? Yes | No