Troubleshooting
Xerox WorkCentre 3550
User Guide
167
3. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there is any
resistance when you pull, stop and go to the next step.
4. Open the rear door.
5. If you see the jammed paper, pull down the pressure levers
on each side and remove the paper.
If you still do not see the paper, go to the next step.
6. Unfold the duplex guide fully and release the pressure lever
on each side.
7. While pushing the fuser lever to the right, open the fuser
door.
8. Pull the jammed paper out.
9. Return the lever, door and guide to their original position.
10. Close the rear door. Printing automatically resumes.
To Next Page
Loading...
