CHAS
REAR WHEEL
7-15
5. Measure:
• Thickness of brake shoes a
Outside specified value
Change
6. Inspect:
• Drum brake inner surface
Oil/Scratches
Replace
7. Measure
• Drum brake inner diameter
a :
Out of specification
Replace
EAS00570
ASSEMBLING THE BRAKE SHOES
When the brake shoe carrier plate is assem-
bled, reverse the removal procedure.
Bear in mind the following points.
1. Install:
• brake cam
NOTE:
Apply Grease with a lithium soap base on the
brake cam and pin .
CAUTION:
After installing the brake cam, remove
excess grease.
2. Install:
• brake shoes
• return spring
NOTE:
Install with the mark outwards.
3. Install:
• wear indicator
• cam lever
NOTE:
• Align the projection of the wear indicator
with the line as shown.
• Align the punch marks .
Brake shoes thickness
4.0 mm
<Limit>: 2.0 mm
Wear limit of brake drum
110.5 mm
To Next Page
Loading...
