Yamaha CS50 - Checking the Tires; Checking the Wheels; Checking the Front Fork

CHK
ADJ
CHECKING THE TIRES / CHECKING THE WHEELS/
CHECKING THE FRONT FORK
3-23
EAS00163
CHECKING THE TIRES
1. Measure:
• air pressure
Outside specified value

Adjust
* Total weight of rider, passenger, cargo and
accessories
2. Inspect:
• tyre surface
Worn/Damaged

Change
 Thread depth
 Side wall
 Wear indicator
EAS00168
CHECKING THE WHEELS
The following procedure applies to both of the
wheels.
1. Check:
• wheel
Damage/out-of-round

Replace.
ss
WARNING
Never attempt to make any repairs to the
wheel.
NOTE:
After a tire or wheel has been changed or
replaced, always balance the wheel.
EAS00151
CHECKING THE FRONT FORK
1. Inspect:
• front fork
Bent/Damaged

Fork bar

Change
Oil leaks

Seals

Replace
Rough operation

Fork assembly

Replace
158.3 kg (CS50Z)
Maximum load*: 161.5 kg (CS50)
Pressure cold Front Rear
Up to 90 kg 175kpa. 200kpa.
(1.75kg/cm
2
) (2.0kg/cm
2
)
90 kg to 175kpa. 225kpa.
maximum load (1.75kg/cm
2
) (2.25kg/cm
2
)
Minimum depth of thread of tyres
0.8 mm