SPEC
CABLE ROUTING
2-11
CABLE ROUTING
Front brake hose
Rear brake cable
Front brake calliper
Front mudguard
Taillight
Vacuum pipe
Fuel pipe
Intake hose (L/C)
Wire harness
10 Engine breather
11 Throttle cable
12 Seat lock cable
13 Coolant hose (L/C)
14 DC-CDI
15 Coolant hoses - Carburetor (L/C)
A Insert the three tubes through the clamp
B Connect the oil hose to the carburettor
C Set the intake hose under the reinforcement
(L/C)
D Clamp the fuel pipe to the carburettor
E Tighten together the ground cable and the
starter motor
F Clamp all the cables except the coolant
hose (L/C) without tightening
G Clamp the intake hose to the air filter box
(L/C)
H Pass the brake cable through the guide
To Next Page
Loading...
