SPEC
CABLE ROUTING
2-12
Rectifier / Regulator
Main switch
Fuel level gauge
Horn
Ignition coil
Spark plug wire
Oil level gauge
Oil tank
Speedometer cable
A Clamp the wire harness, brake cable and
throttle to the frame
B Clamp the oil hose to the tank
C Connect the oil hose to the pump
D Tie both ends
E Tighten together the ground cable and the
ignition coil
F Pass the speedometer cable through the
guide
G Insert the seat lock cable throught the orifi-
ce of the frame
CABLE ROUTING
To Next Page
Loading...
