ENG
ENGINE ASSEMBLY AND ADJUSTMENT
4-28
EAS00428
INSTALLING THE TRANSMISSION
1. Apply:
• SE engine oil type 10W30
(on the tansmission box cover bearing)
2. Install:
• secondary sheave axle
(on transmission case cover)
3. Install:
• circlip
• oil seal
NOTE:
Apply grease with lithium soap based onto the
oil seal lips.
4. Check:
• rotation of secondary sheave axle
Rough rotation
Repair.
5. Apply:
• SE type 10W30 engine oil
(on bearing of main axle and drive axle bea-
ring)
6. Install:
• drive axle
• main axle
• conical spring washer
• flat washer
7. Install:
• gasket
• dowel pins
• transmission case cover
Screw (case cover)
9 Nm (0.9 m • kg)
To Next Page
Loading...
