CHK
ADJ
CHANGING THE COOLANT
3-17
6. Install:
• coolant filler cap
7. Warm it up for several minutes, and then
stop it.
8. Check:
• coolant level
Refer to “CHECKING THE COOLANT
LEVEL”.
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
NOTE:
For a quick air bleeding, lift up the front wheel
1metre with the engine at idle speed.
This will provide a effective and air quick blee-
ding from the head cylinder to the radiator.
9. Install
• front upper cowling
To Next Page
Loading...
