x
Maintenance and Inspection Precautions
Disposal Precautions
• Do not attempt to disassemble the MP2100/MP2100M.
There is a risk of electrical shock or injury.
• Do not change wiring while power is being supplied.
There is a risk of electrical shock or injury.
• When replacing the MP2100/MP2100M, restart operation only after transferring the programs and
parameters from the old MP2100/MP2100M to the new MP2100/MP2100M.
There is a risk of device damage.
• Dispose of the MP2100/MP2100M as general industrial waste.
CAUTION
CAUTION
To Next Page
Loading...
