3 System Startup
3.1.6 Verifying Driver Installation
3-8
3.1.6 Verifying Driver Installation
Use the following procedure to verify that the MP2100 is recognized properly by the system and the drivers are
installed properly.
1. Click the Start Button and select Settings/Control Panel from the Start menu.
2. Double-click the System Icon.
3. The System Properties Window will be displayed. Click the Hardware Tab and then click the Device
Manager Button.
4. Open the Memory technology driver Folder and double-click the MP2100 Programming Logic Con-
troller Icon.
Check the Device status information and verify that it says “This device is working properly.”
To Next Page
Loading...
Need help?
General
