YASKAWA MP2100 Series - Page 3

iii
Using this Manual
Please read this manual to ensure correct usage of the MP2100/MP2100M system. Keep this manual in a safe
place for future reference.
■
Basic Terms
Unless otherwise specified, the following definitions are used:
■
Manual Configuration
Read the chapters of this manual as required by the purpose.
• MP
2100
:
Machine Controller MP2100
• MP
2100M:
Machine Controller MP2100M
• PC:
Programmable Logic Controller
• PP:
Programming Panel
• MPE720:
The Programming Device Software or a Programming Device (i.e., a personal computer) running the
Programming Device Software
Chapter
Selecting
Models and
Peripheral
Devices
Studying
Specifications
and Ratings
Designing
the System
Installation
and Wiring
Trial
Operation
Maintenance
and
Inspection
Chapter 1
Overview
Applicable --- --- --- --- ---
Chapter 2
System Configuration
Applicable --- --- --- --- ---
Chapter 3
System Startup
--- --- --- --- Applicable ---
Chapter 4
Specifications
Applicable Applicable Applicable Applicable --- ---
Chapter 5
Installation and Wiring
--- Applicable Applicable Applicable --- ---
Chapter 6
Basic System Operation
--- --- Applicable --- Applicable ---
Chapter 7
Motion Parameters
--- --- Applicable --- Applicable ---
Chapter 8
Motion Commands
--- --- Applicable --- Applicable Applicable
Chapter 9
Control Block Diagrams
--- --- Applicable --- Applicable Applicable
Chapter 10
Absolute Position
Detection
--- --- Applicable --- Applicable Applicable
Chapter 11
SVR Virtual Motion
Module
--- --- Applicable --- Applicable Applicable
Chapter 12
Maintenance and
Inspection
--- --- --- --- --- Applicable
Chapter 13
Troubleshooting
--- --- --- --- Applicable Applicable
Chapter 14
Application Precations
Applicable --- Applicable --- Applicable Applicable