Yealink SIP-T58V/A User Manual

Configuring Advanced Features
233
Parameters
Permitted Values
Default
Description:
Configures the block out numbers.
Example:
dialplan.block_out.number.1 = 4321
When you dial the number “4321” on your phone, the dialing will fail and the touch screen
will prompt "Forbidden Number".
Note: It works only if the values of the parameters “dialplan.digitmap.enable” and
“account.X.dialplan.digitmap.enable” are set to 0 (Disabled).
Web User Interface:
Settings->Dial Plan->Block Out->BlockOut NumberX
Phone User Interface:
None
dialplan.block_out.line_id.X
(X ranges from 1 to 10)
0, Integer from 1
to 16
Blank (for all
lines)
Description:
Configures the desired line to apply the block out rule. The digit 0 stands for all lines. If it is
left blank, the block out rule will apply to all lines on the IP phone.
Example:
dialplan.block_out.line_id.1 = 1,2,3
Note: Multiple line IDs are separated by commas. It works only if the values of the
parameters “dialplan.digitmap.enable” and “account.X.dialplan.digitmap.enable” are set to 0
(Disabled).
Web User Interface:
Settings->Dial Plan->Block Out->Account
Phone User Interface:
None
To create a block out rule via web user interface:
1. Click on Settings->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut NumberX field.
3. Enter the desired line ID in the Account field or leave it blank.

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English