Administrator’s Guide for SIP-T5 Series Smart Media Phones
762
Appendix F: Static Settings
You may need to know the differences between the parameters started with “static.” and other
common parameters:
All static settings have no priority. They take effect no matter what method (web user
interface or phone user interface or configuration files) you are using for provisioning.
All static settings are never be saved to <MAC>-local.cfg file.
All static settings are not affected by the overwrite mode. That is, the actual values will not
be changed even if you delete the parameters associated with static settings, or you clear
the values of the parameters associated with static settings in the configuration files.
The following table lists all static settings:
static.network.ip_address_mode
static.network.ipv6_prefix
static.network.ipv6_internet_port.type
static.network.ipv6_internet_port.ip
static.network.ipv6_internet_port.gateway
static.network.ipv6_primary_dns
static.network.ipv6_secondary_dns
static.network.ipv6_icmp_v6.enable
static.network.internet_port.type
static.network.internet_port.ip
static.network.internet_port.mask
static.network.internet_port.gateway
static.network.primary_dns
static.network.secondary_dns
static.network.dhcp_host_name
static.network.pppoe.user
static.network.pppoe.password
static.network.pc_port.enable
static.network.internet_port.speed_duplex
static.network.pc_port.speed_duplex
To Next Page
Loading...
Need help?
General
