Configuring Advanced Features
515
5. Tap the Key Type field.
6. Tap Record in the pop-up dialog box.
7. (Optional.) Enter the string that will appear on the touch screen in the Label field.
8. Tap to accept the change.
To configure a URL record key via phone user interface:
1. Tap Settings->Features->DSS Keys.
2. Tap the desired DSS key.
3. Tap the Type field.
4. Tap URL Record in the pop-up dialog box.
5. (Optional.) Enter the string that will appear on the touch screen in the Label field.
6. Enter the URL in the Value field.
7. Tap to accept the change.
Hot Desking
Hot desking originates from the definition of being the temporary physical occupant of a work
station or surface by a particular employee. A primary motivation for hot desking is cost
reduction. Hot desking is regularly used in places where not all employees are in the office at
the same time, or not in the office for a long time, which means actual personal offices would
often be vacant, consuming valuable space and resources.
Hot desking allows a user to clear registration configurations of all accounts on the IP phone,
and then register his account on line 1. To use this feature, you need to assign a hot desking key.
Procedure
Hot Desking feature can be configured using the following methods.
Central Provisioning
(Configuration File)
Configure the hot desking login wizard.
Parameters:
hotdesking.dsskey_register_name_enable
hotdesking.dsskey_username_enable
hotdesking.dsskey_password_enable
hotdesking.dsskey_sip_server_enable
hotdesking.dsskey_outbound_enable
Assign a hot desking key.
Parameters:
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
linekey.X.label/
To Next Page
Loading...
Need help?
General
