Yealink SIP-T58V/A

Configuring Advanced Features
385
ReCall
ReCall, also known as last call return, allows users to place a call back to the last caller. Recall is
implemented on IP phones using a recall key. When you tap the recall key, you will place a call
to the phone number that last called you.
Procedure
Recall key can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Assign a recall key.
Parameter:
linekey.X.type/
programablekey.X.type/
expansion_module.X.key.Y.type
linekey.X.label/
expansion_module.X.key.Y.label
Web User Interface
Assign a recall key.
Navigate to:
http://<phoneIPAddress>/servlet?
m=mod_data&p=dsskey&q=load
Phone User Interface
Assign a recall key.
ReCall Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring DSS
Key on page 750.
Details of Configuration Parameters:
Parameters
Permitted
Values
Default
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
7
Refer to the
following
content