Configuring Advanced Features
159
seconds.
Web User Interface:
Settings->Preference->Backlight Time(seconds)
Phone User Interface:
Settings->Basic->Display->Backlight->Backlight Time
To configure the backlight via web user interface:
1. Click on Settings->Preference.
2. Select the desired value from the pull-down list of Backlight Active Level.
3. Select the desired value from the pull-down list of Backlight Time(seconds).
4. Click Confirm to accept the change.
To configure the backlight via phone user interface:
1. Tap Settings->Basic->Display->Backlight.
2. Drag the Backlight Active Level slider.
3. Tap the Backlight Time field.
4. Tap the desired time in the pop-up dialog box.
5. Tap to accept the change.
Bluetooth
Bluetooth enables low-bandwidth wireless connections within a range of 10 meters (32 feet).
The best performance is in the 1 to 2 meters (3 to 6 feet) range. You can activate/deactivate the
Bluetooth mode and then pair and connect the Bluetooth headset with your phone. You can
also connect the other Bluetooth devices (e.g., mobile phone or smart media phone) with your
phone. Users can transfer files via Bluetooth, sharing images/videos with other Bluetooth
devices. For more information, refer to the
Yealink phone-specific user guide
.
You can personalize the Bluetooth device name for the IP phone. The pre-configured Bluetooth
To Next Page
Loading...
Need help?
General
