Yealink SIP-T58V/A User Manual

Administrator’s Guide for SIP-T5 Series Smart Media Phones
400
Mute
Yealink IP phones support muting the microphone of the active audio device (handset, headset
or speakerphone) during an active call or while dialing. You can activate the mute feature by
pressing the MUTE key. Normally, mute feature is automatically deactivated when the active call
ends. You can enable keep mute feature to keep the mute state persist across the calls.
Allow Mute
You can mute the microphone of the active audio device during an active call, and then the
other party cannot hear you. If allow mute feature is disabled, you cannot mute an active call.
Procedure
Allow mute can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cf
g
Configure allow mute feature.
Parameter:
features.allow_mute
Web User Interface
Configure allow mute feature.
Navigate to:
http://<phoneIPAddress>/servlet?m=m
od_data&p=features-general&q=load
Details of Configuration Parameter:
Parameter
Permitted Values
Default
features.allow_mute
0 or 1
1
Description:
Enables or disables the IP phone to mute an active call.
0-Disabled
1-Enabled
Web User Interface:
Features->General Information->Allow Mute
Phone User Interface:
None
To configure allow mute via web user interface:
1. Click on Feature->General Information.

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English