Yealink SIP-T58V/A

Configuring Video Features
661
Configuring Video Features
The SIP-T58V/A IP phones support transmission and reception of high quality video images. The
video is compatible with RFC 3984 - RTP Payload Format for H.264 Video, RFC 7741 - on RTP
Payload Format for VP8 Video.
This section provides information for making configuration changes for the following
video-related features:
 Video Settings
 Video Codecs
Video Settings
The SIP-T58V/A IP phones support USB camera for point-to-point video calls. Users can place
and answer video calls. The IP phones support transmission and reception of high quality video
images. You can configure camera flicker to optimize video calling. Indoor lights powered by a
50Hz or 60Hz power source can produce a flicker. You can adjust the camera flicker frequency
according to the power source the light is powered by.
Toggle Between Audio-only or Video Calls
The video call feature is enabled by default. You can disable this feature as required. When you
disable the video call feature, the calls are audio–only.
Procedure
Configuration changes can be performed using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the video settings.
Parameters:
video.enable
camera.flicker
Local
Web User Interface
Configure the video settings.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-camera&q
=load