Administrator’s Guide for SIP-T5 Series Smart Media Phones
430
Details of the Configuration Parameter:
phone_setting.permit_silent_mode.enable
Description:
Enables or disables the user to have the permission to use the silent mode feature.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the Silent Mode item will disappear from the phone user
interface at the path: Settings->Basic->Sound. Users can neither enable the silent mode
feature from the control center or via phone user interface, nor adjust the ringer volume to
minimum.
Web User Interface:
None
Phone User Interface:
None
Door Phone
Door phone is used to control the opening of the door giving access to any kind of buildings,
offices, or apartment blocks. You can connect the door phone to one or multiple IP phones and
control the opening of the door on the IP phone. The IP phone is only compatible with the door
phone of 2N. For more information on how to connect the door phone and IP phone, refer to
the documentation from the 2N.
You can configure up to two door phones on the IP phone. You can also configure call settings
(transmit audio/video or not, display the call in full-screen mode) for the door phone call.
Procedure
Door phone settings can be configured using the following methods.
Central Provisioning
(Configuration File)
Configure the door phone
information.
Parameters:
features.doorphone.X.display_name
features.doorphone.X.phone_number
Configure the unlock PIN of the door
phone.
Parameter:
To Next Page
Loading...
Need help?
General
