Configuring Advanced Features
363
2. Select Enabled from the pull-down list of Feature Key Synchronization.
3. Click Confirm to accept the change.
Transfer Mode via Dsskey
Transfer mode via dsskey enables IP phones to handle the current call differently via the DSS key.
IP phones support three transfer modes: New Call, Blind Transfer and Attended Transfer. For
more information on Blind Transfer and Attended Transfer, refer to Call Transfer on page 354.
The transfer mode via dsskey feature is available when the DSS key is assigned to the following
features:
Speed dial
Transfer
BLF/BLF List
For more information on how to configure the DSS Key, refer to Appendix D: Configuring DSS
Key on page 750.
Procedure
Transfer mode via dsskey can be configured using the following methods.
Central Provisioning
(Configuration File)
Configure the transfer mode via
dsskey.
Parameter:
transfer.dsskey_deal_type
Configure the transfer mode via
dsskey.
To Next Page
Loading...
Need help?
General
