Administrator’s Guide for SIP-T5 Series Smart Media Phones
106
provisioning server has previously been configured with settings it will use those previous
settings.
Provisioning Methods
IP phones can be configured automatically through configuration files stored on a central
provisioning server, manually via web user interface or phone user interface, or by a
combination of the automatic and manual methods.
There may be a configuration priority among the provisioning methods - settings you make
using a higher priority provisioning method override settings made using a lower priority
provisioning method.
The precedence order for configuration parameter changes is as follows (highest to lowest):
Note
The priority mechanism takes effect only if the value of the parameter
“static.auto_provision.custom.protect” is set to 1. For more information on this parameter, refer
to Configuration Parameters on page 127.
Static settings have no priority. For example, settings associated with auto
provisioning/network/syslog, TR069 settings and internal settings (e.g., the temporary
configurations to be used for program running). For more information, refer to
Appendix F: Static
Settings on page 762.
To Next Page
Loading...
Need help?
General
