Configuring Audio Features
635
4. Enter the desired value in the DTMF Payload Type(96~127) field.
5. Click Confirm to accept the change.
To configure the number of times to send the end RTP Event packet via web user
interface:
1. Click on Features->General Information.
2. Select the desired value (1-3) from the pull-down list of DTMF Repetition.
3. Click Confirm to accept the change.
Suppress DTMF Display
Suppress DTMF display allows IP phones to suppress the display of DTMF digits during an active
call. DTMF digits are displayed as “*” on the touch screen. Suppress DTMF display delay defines
whether to display the DTMF digits for a short period of time before displaying as “*”.
To Next Page
Loading...
