Setting Up Your System
113
E2_T4_Series_T5_Series_W5_Series_IP_Phones_Auto_Provisioning_Guide_V81
.
Resource Files
When configuring some particular features, you may need to upload resource files to IP phones.
Resource files are optional, but if the particular feature is being employed, these files are
required.
If the resource file is to be used for all IP phones of the same model, the access URL of resource
file is best specified in the common CFG file. However, if you want to specify the desired phone
to use the resource file, the access URL of resource file should be specified in the MAC-Oriented
CFG file. During provisioning, the IP phones will request the resource files in addition to the
configuration files. For more information on the access URL of resource file, refer to the
corresponding section in this guide.
The followings show examples of resource files:
Language packs
Ring tones
Local contact file
For more information on resource files, refer to Obtaining Configuration Files and Resource Files
on page 114.
If you want to delete resource files from a phone at a later date - for example, if you are giving
the phone to a new user - you can reset the IP phone to factory configuration settings. For more
information, refer to Resetting Issues on page 730.
To Next Page
Loading...
Need help?
General
