Administrator’s Guide for SIP-T5 Series Smart Media Phones
8
There are many ways to set up a phone network using Yealink IP phones. The following shows
an example of a network setup:
Connecting the IP Phones
This section introduces how to install SIP-T58V/T58A/T56A IP phones with components in
packaging contents.
1. Insert the camera (not applicable to SIP-T56A IP phones)
2. Attach the stand and the optional wall mount bracket
3. Adjust the angle of touch screen (not applicable to SIP-T56A IP phones)
4. Connect the handset and optional headset
5. Connect the power and network
6. Connect the optional USB flash drive
Note
The optional accessories are not included in packaging contents. You need to purchase them
separately if required.
To Next Page
Loading...
Need help?
General
