Administrator’s Guide for SIP-T5 Series Smart Media Phones
322
Phone User Interface:
None
To configure 180 ring workaround via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of 180 Ring Workaround.
3. Click Confirm to accept the change.
Use Outbound Proxy in Dialog
An outbound proxy server can receive all initiating request messages and route them to the
designated destination. If the IP phone is configured to use an outbound proxy server within a
dialog, all SIP request messages from the IP phone will be sent to the outbound proxy server
forcibly.
Note
Procedure
Use outbound proxy in dialog can be configured using the following methods.
Central Provisioning
(Configuration File)
Specify whether to use outbound
proxy in a dialog.
Parameter:
To use this feature, make sure the outbound server has been correctly configured on the IP
phone. For more information on how to configure outbound server, refer to Account
Registration on page 165.
To Next Page
Loading...
Need help?
General
