Yealink SIP-T58V/A User Manual

Administrator’s Guide for SIP-T5 Series Smart Media Phones
176
Call Display
Display called party information allows the IP phone to present the callee identity in addition to
the presentation of caller identity when it receives an incoming call.
The following figure shows an example of screen display when Display Called Party Information
feature is enabled on the phone (a call from Marry (phone number: 1008) to Tom.
You can customize the call information to be displayed on the IP phone as required. IP phones
support five call information display methods: Number+Name, Name, Name+Number, Number
or Full Contact Info (display name<sip:xxx@domain.com>).
Procedure
Call Display can be configured using the following methods.
Central Provisioning
(Configuration File)
<y0000000000xx>.cfg
Configure display called party
information feature.
Parameter:
phone_setting.called_party_info_disp
lay.enable
Specify the call information display
method.
Parameter:
phone_setting.call_info_display_met
hod
Web User Interface
Configure display called party
information feature.
Specify the call information display
method.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-calldisplay

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English