Yealink SIP-T58V/A

Configuring Advanced Features
177
&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.called_party_info_display.enable
0 or 1
0
Description:
Enables or disables the IP phone to display the called account information when receiving
an incoming call.
0-Disabled
1-Enabled
Web User Interface:
Settings->Call Display->Display Called Party Information
Phone User Interface:
None
phone_setting.call_info_display_method
0, 1, 2, 3 or 4
0
Description:
Specifies the call information display method when the IP phone receives an incoming call,
dials an outgoing call or is during an active call.
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
Web User Interface:
Settings->Call Display->Call Information Display Method
Phone User Interface:
None
To configure call display features via web user interface:
1. Click on Settings->Call Display.
2. Select the desired value from the pull-down list of Display Called Party Information.